TU400 Vis
TU500 UV-Vis
T6V Vis
T6U UV-Vis
TU600 UV-Vis
T7 UV-Vis
T7S UV-Vis
T7D UV-Vis
TU700 UV-Vis
T7DS UV-Vis
T8DCS UV-Vis
T9DCS UV-Vis
T10DCS UV-Vis
UVWIN 6/GMP SOFTWARE
UV/VIS IQ/OQ/PQ Qualification kit
FTIR8000
FTIR8100
A500
A3F
A3G
A3AFG
AA990F
AA990G
AA990AFG
PF7
FP912-2
FP912-3
FP912-4
FP912-5
AAS IQ/OQ/PQ
XD-2
XD-3
XD-6
M7 Single Quadrupole GC-MS
G5 GC
GC1100 GC
L600 High Performance Liquid
IPW-1000
I-Box
GBW-1
GWB-1-B
GWB-2
GWB-2-B
M40 Microwave Digestion System
D70E Labware Washer

News

All
company news
Industry information
Why Does a UV-Vis Baseline Drift During Long Measurements
A UV-Vis run can look clean at the first blank, then slowly pull upward, downward, or sideways over the...
UV-Vis Method Validation: Which Parameters Matter in Pharma QC
A UV-Vis procedure can be technically sound and still fail in pharmaceutical QC if its validation package...
Quartz vs Glass Cuvettes: Which One Should You Use for UV-Vis
A cuvette is a small part of a UV-Vis workflow, but it sits directly in the light path. Its material,...
Infant Formula Contaminant Testing: Where AAS Fits in 2026
Infant formula testing is not a single instrument purchase. The powder, water, mineral premix, processing...
What FDA’s 2026 Microplastics Push Means for Food Testing Labs
Food laboratories have been watching microplastics for years, but FDA’s 2026 language gives the topic...
UCMR 6 Is Coming: What Water Testing Labs Should Prepare For
UCMR 6 is still in the proposed-rule stage, but water testing labs do not have to wait for the final...
GC vs HPLC for Food Additives: Which Method Fits Preservatives, Flavors, and Organic Acids
Choosing between gas chromatography and high-performance liquid chromatography for food additives is...
Flame Photometer vs AAS for Sodium and Potassium: Which Is Better for Routine Testing
For routine sodium and potassium testing, the choice between a flame photometer and an atomic absorption...
Why GC-MS Sensitivity Drops: Vacuum, Filament, Source, and Column Troubleshooting
When a GC-MS signal falls, replacing the filament is tempting. Sometimes that is the answer. Just as...
Headspace GC for Residual Solvents: What Pharma Labs Should Check Before Validation
A headspace method can look simple on paper: heat a sealed vial, transfer the vapor, separate the solvents,...
Load More